杭州速能機械有限公司

谘詢電話：

138 6806 3066
中心孔機床SJD120係列

中心孔機床SJD120係列

中心孔機床SJD120
￥ 0.00
0.00
  
中心孔機床SJD120

技術數據


加工規格範圍
L=500--10000mm
D=φ50--φ500mm
 
加工功能描述
標配功能 銑端麵、鑽中心孔
選配功能  
1.銑端麵、鑽孔攻絲、套車外圓、倒角等
2.銑端麵、鏜孔、鉸孔等
3.銑端麵、鑽中心孔、套車外圓、倒角等
 
夾持精確穩定、大小調整操作簡單的分離式雙V液壓自定義夾具
Separantion type dual-Vhydraulic self-centering fixture with precise and stable clamping and simple operation in adjustment
 
高剛性的主軸及動力設計，滿足大型銑削刀盤的強力切削需求
High-rigidity spindle and cutter disc's strong cutting demands
 
整體鑄造平床身,寬體式精密導軌支承結構,滿足大重型工件的切削承載
Integrated casting flat bed,broad precise guideway support structure,which meet large and heavy work piece's cutting demands
 
導軌滑動接觸麵都經人工精心產刮、並布局合理的潤滑油槽
Guideway slide contact face experiences the precise manual scraping,in addition to lubricating oil groove with reasonable layout
 
強剛性銑鑽攻三主軸結構，標準化的刀柄接口
Strong-rigidity milling/drilling/tapping three-spindle structure,standardized shank
大型強鋼性銑打雙軸組合動力頭
1.銑刀中心可放中心鑽
2.銑和鑽可以分開
3.銑鑽一體，另一主軸可以鑽孔，也可以鏜孔
1.A center srill can be placed at the center of milling cutter.2.The milling cutter and drill can be separated.3.The milling cutter and drill are integrated,and the other shaft can be used to drill 
and bore holes.
  典型加工樣件  
 
  技術參數